Up Close: Ulysse Nardin Executive Tourbillon Free Wheel

Mysterious mechanics.

With the Freak being the undisputed flagship complication of Ulysse Nardin – as well as a historically important watch – many of the brand’s other technical accomplishments often go under the radar.

One intriguing offering that hasn’t gotten much attention: the Executive Tourbillon Free Wheel. Despite the somewhat dull name, the Tourbillon Free Wheel is a compelling reinterpretation of a mystery clock – where the mechanics are artfully hidden and exposed for visual effect – that is both fascinating and exotic.

The Executive Tourbillon Free Wheel with an aventurine dial

While the base model of the Executive collection features a largely conventional, open-worked movement, the Tourbillon Free Wheel takes things a step further by elevating the crucial parts of the movement like the barrel, tourbillon regulator, and gear train for the power reserve.

In fact, most of the components are “floating” – the movement boasts a flying tourbillon, a “flying” gear train and power reserve indicator, as well as a “floating” barrel. At the same time, the construction is inverted, with parts that are usually hidden sitting exposed, and vice versa. As a result, the tourbillon and power reserve display appear to operate in isolation, with no obvious connection to the rest of the movement.

Floating and flying minimalism

While much of the gearing is hidden underneath the dial – which doubles up as the base plate – most of the moving parts are “floating” – anchored only by pinions on the underside and without a bridge. That explains why the movement appears to have been constructed upwards, towards the wearer, rather than being arranged flat on a single plane as in an ordinary movement.

But the construction of the movement is not just a static display – because of the exposed gears, winding the movement quite literally animates it.

Despite its unusual looks, the movement in the Tourbillon Free Wheel is laid out in a largely conventional manner, in the sense that the tourbillon is at six, with the mainspring at 12 o’clock, and the visible motion works in between the two. The result is a fairly balanced layout, with wide space of the dial mostly occupied.

The version with a slate stone dial

The hand-wound UN-176 inside is a large movement equipped with an huge barrel with a single, long mainspring that has a power reserve of seven days. On the lower left of the barrel is the dedicated gear train serving as part of the power reserve mechanism, with attention centred on the planetary gear held in place by a boomerang-shaped bridge.

The large barrel at 12 o’clock, decorated with a disc in the same material as the dial

The keyless works that wind the mainspring and set the time

Though the mechanism that measures the power reserve is located at eight o’clock, in a mysterious twist, the power reserve indicator is located on the opposing side of the dial at four o’clock.

This bit of mechanical theatre makes it seem that the mechanism and display are not connected physically – and it also serves to balance the visual elements on the dial – but they are of course linked, via simple but smart double rack. It’s essentially a long U-shaped lever pivoted at a single point, which has racks on each end. One rack connects to the reduction gear train and the other connects to the indicator. Similarly, the going train that powers the tourbillon is also concealed behind the dial.

The “floating” bits of the movement add a layer of complexity to its assembly, as extra-long pivots are required to link the “floating” parts to the hidden gears below. The challenge lies in installing the gears above while ensuring the pivots are perfectly vertical, which requires more time as the shafts lengthen.

The power reserve mechanism with the planetary gears below the boomerang bridge

The power reserve indicator with a small arrow pointing to a graduated scale that narrows as the barrel winds down

Full-spec silicon

The flying tourbillon is equipped with the brand’s signature Ulysse Anchor Escapement. Although the proprietary escapement can also be found in other Ulysse Nardin watches, it has the greatest visual effect in the Tourbillon Free Wheel, sitting high above the dial and unencumbered by any bridges.

Made entirely from silicon, the Ulysse Anchor Escapement is one of only two truly integrated constant force escapements – the other being the Girard-Perregaux Constant Escapement. A true constant force escapement means the constant force mechanism is integrated into the escapement itself, as opposed to external mechanisms, such as a fusée and chain, that powers a regular escapement.

The upside of a true constant force escapement means the constant impulse from the escapement is delivered directly to the balance, eliminating a host of variables that could arise if it was positioned elsewhere in the movement. The fairly common and traditional remontoir d’egalite, for instance, relies on a secondary alloy spring to deliver power to the escapement in small doses; but the spring itself has slight variations in torque, while also creates its own energy loss through friction.

The flying tourbillon that seemingly floats

Like Girard-Perregaux Constant Escapement, the Ulysse Anchor Escapement relies on the slight elasticity of silicon to create constant force. The pallet lever is essentially a compliant mechanism, a single piece of silicon that has no pivots or joints but is able to flex at certain points.

A circular silicon frame holds the lever in place, with the motion of the lever being controlled by two perpendicular, buckling blades of silicon integrated into the frame; each blade converges on the pivot point of the lever thereby controlling its back and forth action. Both blades flex between fixed ends with an equal amount of energy needed each time to buckle them, thus supplying constant force to the balance wheel in operation.

Because the blades require only a tiny bit of energy to flex, they deliver constant force regardless of the torque from the mainspring.

The physical properties of silicon enable not just the constant force function, but the very shape and design of the escapement. The unusually intricate escape wheel and pallet lever are only possible in silicon, because they are too complex to be executed in traditional alloys.

The specialised process of deep reactive-ion etching (DRIE) used to produce silicon components allows for highly complex shapes on multiple dimensions, which allows the frame, lever, and escape wheel to be skeletonised, reducing their weight to a minimum. In fact, the silicon escapement parts would be excessively heavy if they were made of metal.

And the silicon parts also operate with virtually no friction, meaning no lubrication is needed. Coupled with the relatively small balance wheel, the entire set up operates in an energy-efficient manner.

High-contrast finish

With the mechanics being a crucial part of the design, much attention has been devoted to maximise the contrast of the moving parts.

Contrast is achieved not just with colour, but also surface finish. Most of the visible components are gold-plated, while the screws are polished and then black-coated. On the other hand, the recessed centres of the pivot caps on the wheels are filled with a matte black lacquer. And the jewels visible on the front are clear, instead of the conventional red, keeping the colour scheme consistent.

The small planetary gears in the differential are in steel, albeit by necessity for harder-wearing teeth

Perhaps because the architecture of the movement is fairly minimalist, the attention to detail on the visible components is impressive. The finishing is notably fine, especially on the wheels – they have wide, polished bevels on the spokes and rims, along with sharp inward angles where the spokes meet the rim.

The top surfaces of the bridges are either brushed or frosted for contrast against the finishing of the wheels

On the back, the view is simple: it’s a full plate with a frosted, black-coated finish that is virtually empty save for a few jewels set in gold chatons. Intriguingly, however, the chatons are finished differently, with half being mirror polished, the usual finish for a chaton, and the other two frosted.

Contrast the frosted chatons with the polished examples

Maximum movement, minimal case

At 44 mm wide and 13.5 mm high, the Executive Tourbillon Free Wheel is a massive watch. And the wide dial and lack of a bezel further accentuates its large appearance.

However, it is a lot more wearable than its dimensions suggest as the case band is less than half the height – most of the height is transparent sapphire crystal. To ensure an unimpeded view of the dial components, the crystal is a highly domed “box-type” – the crystal is so high it resembles the glass dome of a cake plate – giving the dial a strikingly airy look.

The strap attachments are a variation of the brand’s trademark integrated, triple lugs. While the standard triple lugs are equal in size with a uniform finish, this has a sleeker profile with a wider, brushed central lug flanked by narrow, polished side lugs.

Even though the lugs have been redesigned, the triple lugs still look clunky and unnecessarily complicated; they draw attention away from the interesting dial and movement. And the lug style also calls for an integrated strap with a stiff insert, meaning it doesn’t quite conform to the wrist.

Of all the elements in the watch, the lugs are the only ones that can be meaningfully improved.

The variants

The Tourbillon Free Wheel was originally launched in either rose or white gold, with the dials in slate stone or honeycomb-grid respectively, both as part of the regular collection.

And last year, Ulysse Nardin unveiled a quartet of limited editions, each of 18 pieces and fitted with the dial in an exotic material. The dial options comprise osmium, a bluish-white metal from the platinum family; Carbonium, a carbon composite that’s environmentally friendly because it comes from offcuts generated by the production of aircraft bodies and wings; straw marquetry; and aventurine glass.

The aventurine glass dial (left), and black slate

All the iterations of the Tourbillon Free Wheel are striking, and also unusually elegant for such a large watch, mainly due to the delicacy of the components.

The version with the osmium dial is the least striking, because there is less contrast between the rhodium-plated movement parts and the silvery-blue osmium dial.

On the other hand, the aventurine dial offers the most visual spectacle, as it plays to the futuristic, slightly sci-fi look of the movement, creating the impression that the components are floating in space.

Concluding thoughts

Tourbillon watches are common enough now that they are difficult to do differently. The Executive Tourbillon Free Wheel manages to be intriguing mechanically, aesthetically and conceptually, while being fairly priced as such things go, starting at US$96,000 for the base model.

In fact, with its unusual movement architecture and exotic escapement, the Tourbillon Free Wheel can be put in the same category of mechanical novelty as the Freak, though the Freak is indisputably an outlier and landmark in modern watchmaking.


Ulysse Nardin Executive Tourbillon Free Wheel
Ref. 1766-176 (rose gold with black slate dial)
Ref. 1766-176LE/AVE (rose gold with aventurine dial)

Diameter: 44 mm
Height: 13.5 mm
Material: 18k rose gold
Water resistance: 30 m

Movement: UN-176
Functions: Hours and minutes; power reserve indicator
Frequency: 18,000 beats per hour (2.5Hz)
Winding: Hand-wound
Power reserve: 7 days

Strap: Carbon black alligator leather

Limited edition: Regular production in slate and honeycomb; 18 pieces each in aventurine, osmium, Carbonium, and straw marquetry
Availability:
 Already at Ulysse Nardin retailers and boutiques
Price: Ranging from US$96,000 in rose gold with a black slate dial, to US$102,000 for the osmium dial (or 147,700 and 156,900 Singapore dollars respectively)

For more information, visit Ulysse-nardin.com.


Addition February 10, 2020: A brief explanation of the double rack that connects the power reserve indicator was added to the text, thanks to details provided by Stéphane von Gunten, the Research and Innovation Director at Ulysse Nardin and its sister company Girard-Perregaux.

Back to top.

You may also enjoy these.

Panerai Introduces the Luminor Marina Carbotech PAM 1661

The LAB-ID doppelgänger.

Three years ago, Panerai introduced the LAB-ID Luminor 1950 Carbotech 3 Days PAM 700, an experimental watch boasting carbon-based innovations inside and out, including ceramic bridges and plates that do away with jewelled bearings as well as a dial coated in carbon nanotubes giving it an absolute black finish. But the LAB-ID was truly experimental, and word has it that only a handful were sold and the planned 50-piece run was never completed.

But no doubt due to the popularity of the LAB-ID’s design – and unpopularity of the €50,000 price tag – Panerai has just announced the Luminor Marina Carbotech 44 mm (PAM01661). It’s essentially a smaller, simpler LAB-ID, featuring a case in the same material, as well as blue lume on the dial and hands, but with a straightforward automatic movement without any of the bells and whistles found in the LAB-ID.

The Luminor Marina Carbotech 44 mm

Depth rated to 300 m, the case is made of Carbotech, a carbon fibre-reinforced polymer produced by compressing thin sheets of carbon fibres at high pressure with a high-end polymer (PEEK), explaining the wave-like appearance of the material.

The result is a material that is light and strong, explaining why the large, 44 mm case weighs just 96 grammes, less than half the same case in steel.

The LAB-ID of 2017

The watch has a standard Panerai dial, but in the colours of the LAB-ID. Like most Panerai dials, it has a “sandwich” construction, where the hour markers are cut-outs that reveal the blue Super-Luminova on a lower dial disc.

And while the LAB-ID was powered by a hand-wound movement modified with carbon ceramic components as well as a silicon escapement, the new Luminor is equipped with the cal. P.9010, an automatic with a three-day power reserve and date. The movement features a hacking seconds as well as an independently adjustable hour hand that makes changing time zones easy.

The case back is black-coated titanium


Key facts and price

Panerai Luminor Marina Carbotech 44mm
Ref. PAM01661

Diameter: 44 mm
Height: 14.5 mm
Material: Carbotech carbon composite
Water resistance: 300 m

Movement: P.9010
Functions: Hours, minutes and seconds; date
Winding: Automatic

Frequency: 21,600 beats per hour (3Hz)
Power reserve: 3 days

Strap: Rubberised fabric; additional strap in rubber

Limited edition: No
Availability:
 At Panerai boutiques
Price: €12,500, or 18,300 Singapore dollars

For more information, visit Panerai.com


 

Back to top.

You may also enjoy these.

Welcome to the new Watches By SJX.

Subscribe to get the latest articles and reviews delivered to your inbox.