Hands-On: IWC Pilot’s Watch Chronograph Top Gun “SFTI”

A watch for naval aviators.

IWC is not the only maker of pilot’s watches, but it is perhaps the best known. The brand’s line up of aviator’s timepieces is all encompassing, from basic three-handers to chronographs, and paradoxically for an aviation instrument, even perpetual calendars.

But the latest pilot’s offering is straightforward. The IWC Pilot’s Watch Chronograph Top Gun “SFTI” is a chronograph with a ceramic case, but its pushers, crown, and case back are Ceratanium, which is essentially titanium coated with ceramic. And more notably, it’s a limited edition of 1,500 watches that will be sold publicly, but is based on a similar watch created in 2018 that is available only to graduates of the United States Navy Strike Fighter Tactics Instructor (SFTI) programme, better known as TOPGUN.

Initial thoughts

IWC is not short on pilot’s watches, even special or limited-edition pilot’s watches. The brand has rolled out many, many iterations, variations, and editions. But the Pilot’s Watch collection is a bestseller so that’s commercially inevitable.

But that doesn’t take away from the intrinsic appeal of a pilot’s watch. And IWC has been especially successful at tweaking the no-nonsense design to make it interesting in a way that appeals to the boy in every man. Some of the appeal isn’t sophisticated, but it is there – like the red fighter jet silhouette as the seconds hand counterweight.

The base-model IWC Pilot’s Chronograph in steel has that appeal, and in black ceramic case, it looks even better. The addition of the Ceratanium bits on the SFTI version also complete the all-black case. Earlier generations of ceramic pilot’s chronographs had naturally-grey titanium crowns and pushers that contrasted again the black case.

While the differences between the SFTI edition and standard Top Gun chronograph aren’t major, the Ceratanium parts are a nice touch. More significant is the fact that this is modelled on the watch that can only be purchased by graduates of the United States Navy Fighter Weapons School – a little bit of the glamour of a naval aviator has no doubt rubbed off on the watch.

And the premium demanded by the SFTI edition is significant but reasonable: its retail price is US$10,000, which is 17% more than the regular production variant.

Jim DiMatteo, a retired US Navy captain who’s now an IWC “friend of the brand”, with the graduate-only edition on his wrist. Photo – IWC

The IWC Pilot’s Watch Chronograph Strike Fighter Tactics Instructor that’s available only to graduates of TOPGUN

Top Gun

Launched in 2007, the Top Gun collection takes its name from the US Navy training course for fighter pilot instructors, an ordinarily obscure military programme was made world famous by the 1986 movie starring Tom Cruise. Now a centrepiece of the IWC Pilot’s Watch line up, the Top Gun watches started with the Double Chronograph ref. 3799 with a ceramic case. It has since evolved into the Double Chronograph in Ceratanium that was launched last year.

A sampling of the Pilot’s Watch editions IWC has created for members of US Navy Strike Fighter Squadrons – (from left) VFA-102 “Diamondbacks”, VFA-211 “Fighting Checkmates”, and VFA-27 “Royal Maces”. Photo – IWC

The SFTI edition remains largely similar to the regular-production Top Gun chronograph, save for a few minor changes in colour. And it is distinguished from the watch available to TOPGUN graduates at nine o’clock. While the civilian SFTI edition has the hour register at nine, the actual TOPGUN watch has the programme’s emblem in its place, since fighter pilots presumably have no need to record elapsed hours.

From left: The SFTI edition, the Double Chronograph Top Gun in Ceratanium, and the standard Pilot’s Chronograph

The most noticeable difference between the SFTI edition and the other chronographs are the pushers and crown. Ceratanium on the SFTI edition and Double Chronograph, those parts are natural-finish titanium on the regular-production model.

The SFTI edition gets red rings around the base of each pusher, which have no functional purpose but do look good, especially since they pick up on the red accents on the dial.

The Ceratanium back of the SFTI edition (left) against the brushed titanium back of the standard model

Other than colours, the case architecture and dial layout of the SFTI are identical as those on the regular-production chronograph.

That means a simple, no-frills ceramic case that contains an inner titanium case that the case back screws into (since it cannot screw directly onto ceramic, a material that cannot withstand torsional fore). The ceramic is matte, smooth, and looks at home on military-style watch, though it has to be pointed out that ceramic is more brittle than metal. While it is scratch resistant, ceramic can chip or crack with extreme force, whereas a metal alloy case would dent or deform.

And a Ceratanium buckle

Inspired by the dial of the Beobachtungsuhr, or “observation watch”, which IWC produced for the Second World War Luftwaffe, the SFTI edition is simple, crisp, and easily legible, like the rest of the brand’s pilot’s watches. The jet-shaped counterweight is a little bit of a gimmick, but because it’s open-worked, it is surprisingly subtle.

Concentric azurage on the sub-dials

The mechanics

Inside the watch is the in-house cal. 69380, a relatively new movement developed to replace the ETA Valjoux 7750 that was once the standard movement for the IWC pilot’s chronograph – a necessary upgrade since the pilot’s chronograph has suffered from steep price increases over the generations. Distinguishing between the two movements is easy on the dial: the 7750 has its running seconds at nine o’clock, while the cal. 69380 has the seconds at six as it is coupled directly to the fourth wheel.

Being part of the 69000 family of movements, the cal. 69380 is similar to the cal. 69355 found in the new Portugieser Chronograph. It is superior to the robust but cost-efficient 7750 in several ways, include having a column wheel instead of a cam, along with a bidirectional, pawl-winding system similar to the more complicated Pellaton winding mechanism of IWC.

As an aside, the cal. 69380 also has an hour counter at nine o’clock, which the cal. 69355 found in the Portuguese Chronograph does not. That’s accomplished by coupling the hour register hand to the mainspring barrel, which conveniently makes a rotation every 12 hours (and completes about four rotations before hitting empty).

Concluding thoughts

The design tweaks for the SFTI edition are well done – the use of Ceratanium parts give the watch a more uniform look that suits the naval-aviator theme better. It is a handsome watch with many of the characteristic qualities of IWC’s pilot’s watches, namely solid engineering and appealing design.

However, the changes are incremental, although accompanied by a modest price hike relative to the standard version. That said, I would have preferred the SFTI edition replacing the regular-production model instead of being a limited run, which might have made it more affordable thanks to economies of scale.


Key Facts and Price

IWC Pilot’s Watch Chronograph Top Gun Edition “SFTI”
Ref. IW389104

Diameter: 44 mm
Height: 15.7 mm
Material: Ceramic case, with pushers, crown, and case back in Ceratanium
Crystal: Sapphire
Water resistance: 60 m

Movement: Cal. 69380
Functions: Hours, minutes, seconds, day, date, and chronograph
Frequency: 28,800 beats per hour (4 Hz)
Winding: Automatic
Power reserve: 46 hours

Strap: Textile with pin buckle

Limited edition: 1,500 pieces
Availability:
 Only at IWC boutiques and retailers
Price: US$10,000; or 14,100 Singapore dollars

For more, visit IWC.com.


Correction October 16, 2020: The retail price of the SFTI edition is 17% more than the standard-production model, and not 30% as stated in an earlier version of the article.

Back to top.

You may also enjoy these.

De Bethune Introduces the DW5 Cempasúchil

Intricate, artisanal, and peculiar.

Already a well-established tradition at De Bethune, the unusual use of metal alloys along with elaborate engraving defines the Maestri’Art DW5 Cempasúchil, a unique watch created for Salón Internacional Alta Relojería México (SIAR), the country’s leading luxury-watch fair that takes place October 20-22.

The Cempasúchil is a unique piece that’s the latest instalment in the Dream Watch 5 (DW5) series that started out as a sleek creation resembling a metallic seashell. More recently, the DW5 has more recently been used as a blank canvas for heavily decorative engraving, something the Cempasúchil takes that to the extreme.

The titanium case of the Cempasúchil is heat blued and inlaid with gold in various colours, forming an intricate yet cartoonish motif inspired by the Mexican festival of Día de Muertos, or Day of the Dead. And that explains the model name, which is also a type of marigold also known as flor de los muertos, or “flower of the dead”.

Cempasúchil front

And back

Initial thoughts

Done by De Bethune’s go-to engraver, the quality of the work on the Cempasúchil is unmistakably high quality. And the multi-coloured gold inlay elevates the work to another level entirely.

And the exuberant, whimsical of multiple calavera, or decorated skulls, is very much in keeping with the spirit of the Day of the Dead, a celebration of the departed rather than a sad occasion.

But the combination of the DW5 and the motif doesn’t gel. Traditionally seamless, the DW5 has an organically sci-fi aesthetic that looks great unadorned, and sometimes goes well with similarly sci-fi decoration. But with the Day of the Dead motif, the Cempasúchil is, to borrow a phrase favoured by De Bethune, kind of bizarre. A similar motif was applied to the one-off Chopard L.U.C Perpetual T from two years ago, and it worked better there.

Craftsmanship

Like De Bethune’s other engraved watches – which are now collectively known as the Maestri’Art collection – the Cempasúchil is the work of Swiss engraver Michèle Rothen. Her engraving renders in brilliant detail a motif inspired by the work of José Guadalupe Posada, a 19th Mexican artist and printmaker whose illustrations were often centred on political or cultural issues.

In fact, Ms Rothen’s work is taken to a new level on the Cempasúchil, which is inlaid with four gold alloys – white, yellow, rose, and green – along with a fifth “marbled” gold that blends all four colours in a layered alloy. The metallurgical magic is the work of Denis Flageollet, the technical wizard of De Bethune who also has his own foundry at its factory.

The titanium case – blued over a flame – started out as a shell, which was then machined to create recesses to fit the inlays. Ms Rothen engraving covers both the inlays and the case, across the front and back of the watch.

The back has an aperture within one of the skull’s eye sockets, revealing the balance held by a blued titanium bridge

The DB2144V2 movement inside is identical to that found on the standard DW5. Like many De Bethune movements, it is equipped with a balance wheel and escape wheel in silicon, both of the brand’s own design and manufacture.

It’s hand-wound with a five day power reserve, with the time indicated in a narrow window on the right of the case. The hours are shown on a jumping disc, while the minutes on a constantly turning scale. And closer to the centre of the watch is a spherical moon phase that’s made up of two halves in blued steel and palladium respectively.


Key facts and price

Maestri’Art DW5 Cempasúchil
Ref. DW5

Diameter: 58 mm by 47 mm
Height: 16 mm
Material: Titanium with 18k gold inlay
Water resistance: 30m

Movement: DB2144V2
Functions: Jumping hours, minutes, and spherical moon phase
Winding: Hand-wound
Frequency: 28,800 beats per hour (4 Hz)
Power reserve: Five days

Strap: Leather with pin buckle

Limited edition: Unique piece
Price: 275,000 Swiss francs; or 405,100 Singapore dollars

For more, visit Debethune.ch.


 

Back to top.

You may also enjoy these.

Welcome to the new Watches By SJX.

Subscribe to get the latest articles and reviews delivered to your inbox.

Exit mobile version