Up Close: Seiko Prospex LX Spring Drive Diver SNR029

A classic tool watch refined.

Seiko produces a wide – really wide – variety of dive watches. Many are based on historical watches, with several of the high-end models in particular being inspired by the brand’s first 300 m dive watch of 1968. As a result, a good number of Seiko dive watches look pretty similar.

When Seiko unveiled the Prospex LX line at Baselworld last year – the range is made up of six sports watches catered for air, land, and sea – the diver’s watch seemed, well, pretty similar to other Seiko dive watches. But the LX was not a typical range of sports watches, because it was designed in collaboration with Ken Okuyama, one of Japan’s most famous car designers – specifically, Mr Okuyama is best known for his work for Ferrari.

The Prospex LX Spring Drive Diver SNR029 is a typical Seiko dive watch – it’s functional and solidly engineered, with a notably high quality of construction. But Mr Okuyama’s design adds a surprising degree of refinement to the design, which reimagines the retro style of the classical Seiko Hi-Beat diver of 1968 by sharpening the design and refining the details.

Initial thoughts

Seiko dive watches are highly regarded for their strong price-performance ratio at every level of the price spectrum. The Prospex LX Spring Drive Diver SNR029 is a mid-range model, more affordable than a Grand Seiko but more upscale than the base-model Prospex diver.

In terms of functionality, fit and finish, the SNR029 scores highly. Legibility is excellent, Spring Drive timekeeping is essentially perfect, while the case and dial are excellent in quality, and the bracelet is good enough.

On the wrist, the watch is wears large – it is a large watch – but lightweight because it is entirely titanium (save for a few parts of the clasp). That makes it easier to wear than similarly sized Seiko dive watches in steel.

Titanium alloys are fairly prone to scratches, so the titanium case and bracelet have a “super-hard coating”, also know as Diashield, that increases the surface hardness so it scratches less easily. Although Seiko is mum about what exactly the coating is, it is likely a thin layer of ceramic of the sort typically used for industrial applications to increase corrosion resistance and minimise surface wear from friction.

Though I didn’t perform a scratch test on the SNR029, my experience with the coating on other Seiko watches is positive: the “super-hard coating” does reduce scratches and other marks, though it cannot prevent them entirely.

But many of the obvious features of the watch – namely the Spring Drive movement and coated titanium – have long been found in Seiko dive watches. What the SNR029 apart from are small, but useful details, like the increased number of removable links, as well as thoughtful design courtesy of Ken Okuyama.

The design philosophy

A high-profile Japanese designer best known for his work in the automotive industry, Mr Okuyama had stints at General Motors and Porsche, but his most prominent role at Pininfarina, once the go-to designer for Ferrari. As design director at the Italian studio from 1995 to 2006, Mr Okuyama led the design of the Ferrari Enzo and 599, as well as the Maserati Quattroporte, amongst others.

I got to chat with Mr Okuyama at Baselworld last year, and gained a greater understanding of his design philosophy. Specifically, his approach to designing luxury or high-end goods is based on the opinion that such products should timeless and long-lasting.

The Ken Okuyama Kade 57, based on a Ferrari 599. Photo – Ken Okuyama Design

As a result, the design should be evolutionary rather than a radical makeover, so that consumers can grasp the aesthetic lineage from generation to generation. That not only helps build the identity of the brand, but also ensures a product does not look dated, even if it is an older model. In other words, good design is functional but also ensures the perceived value and desirability of a product is preserved.

In his opinion, Western luxury goods firms, notably in fashion and automobiles, are especially good at that. And that was exactly what he set out to do with the LX – refine and sharpen the essence of Seiko’s historical dive watches so that it is instantly recognisable as a Seiko, yet also a modern creation and not a remake. Unsurprisingly, the SNR029 is instantly recognisable as being descended the first “professional” diver.

Historical roots

Though neither the first (which was the “62MAS”) nor the deepest-rated  (which was the ref. 6159-7010 “Tuna”) of Seiko’s historical dive watches, the 300 m dive watch of 1968 (though some information points to it being launched in 1966 or 1967) is arguably the most significant. It was the first “professional” diver rated to 300 m while also being equipped with a high-beat movement to boot. The 300 m diver came to market first as the ref. 6215-7000, which was quickly followed by the near-identical ref. 6159-7001.

Seiko has already made approximate and exact remakes of the 1968 originals several times in the past, including a spot-on remake in 2018, and another faithful “re-creation” just this year. In contrast, the SNR029 (and its siblings in the LX range) are distinctly modern, having been redesigned substantially – down to the smallest detail like the crown – yet clearly descended from the 1968 model.

Tellingly, the SNR029 is almost exactly the same size as the 1968 diver: it measures 44.8 mm wide and 15.7 mm high, compared to 44.0 mm by 13.95 mm for the original. Even though the dimensions are near-identical, the case design and construction are entirely different.

Essentially, the SNR029 has a case that is similar to the remakes as well as the earlier generation of Prospex divers, but the lines have been tightened up for a more purposeful design. The SNR029 has a more sculpted, aggressive stance that brings to mind some of Mr Okuyama’s car designs like the Kode 57.

And it also has a screw-down case back, as oppose to the one-piece, monocoque case of the vintage original. The three-part case construction is the key reason for its increase in height compared to the original.

Note how the end-links of the bracelet echo the shape of the lugs

The SNR029 with its alternating brushed and polished surfaces that help break up its verticality

Compared to the recently announced remake of the 1968 original, the SLA039

The one-piece case of the vintage remake

But it is in the littlest of details that the SNR029 reveals the excellent design (and also excellent quality of machining). Thoughtful design can be found on the crown and bezel, which now have a more geometric, industrial look.

Taller and wider, the crown has the resolute look of a diving tool, and is also easier to operate because of its larger size. And the bezel edge has wider, hexagonal notches that articulate a strong, functional beauty.

The movement

The 5R65 movement inside is hidden under a solid, screw-down back but its qualifications to be in a dive watch are clear.

Because the 5R65 is a Spring Drive calibre – a mechanical movement regulated a high speed flywheel controlled by an electronic “brain” – its timekeeping is less susceptible to deviations caused by environmental factors like temperature fluctuations, shock, or magnetism.

A Spring Drive is, in short, more robust than the average mechanical movement, but it is also self-winding, so there’s no need to worry about a flat battery.

And the 5R65 is actually a dressed-down version of the 9R65 movement found in several Grand Seiko watches. Both are functionally identical, with exactly the same specs, namely a 72-hour power reserve and timekeeping of within a second a day, or 15 seconds a month. But the 9R65 has decorative finishing, while the 5R65 only features stripes on the rotor, with the rest of the movement being unadorned.

The dial

The dial is typical Seiko dive watch style, which means terrific legibility and sensible layout (and several lines of text).

Like the case, the dial retains the feel of the vintage original, but has been sharpened – literally. Both the minute and seconds hands are now tapered, though the hour hand is a conventional oblong shape. Likewise, the 12 o’clock hour marker is gently tapered. All that tapering gives the dial a more assertive look.

And the less important elements of the dial has been reduced. The frame for the date window, for instance, is thinner than on other Prospex divers, while the power reserve uses a fuss-free, printed scale instead of an applied metal marker. While an applied power reserve scale is fancier, and looks at home on a Grand Seiko, the basic printed scale works best here.

The date disc is white, which makes it easy to read, but a black disc would blend in better

The one element of the dial that is slightly superfluous are the markings above six o’clock. It’s crowded with the Prospex logo, three lines of text, plus the power reserve to the left. That’s a bit too much for a professional’s tool, but the markings are standard for all Prospex dive watches so they can’t be done away with.

Every element of the dial possesses an strong mechanical quality, precise in sharp and form. The hands have neat edges and surfaces, and even caps over the axes for the seconds and power reserve hands, so that the pinions below are hidden.

And the hour indices boast an unexpected level of detail: they are stamped and then engraved with a narrow, linear pattern that enhances the “tool watch” look.

The bracelet

Like the case, the bracelet is titanium, with the usual features of a Prospex diver bracelet, namely a ratcheting extension incorporated into the clasp. It is a simple, intuitive design: lifting the safety buckle to the extreme releases the mechanism, allowing the extension to slide out from the clasp.

Unlike the other parts of the watch, the clasp is purely functional; it genuinely looks like a tool. Most of the moving parts in the clasp are steel, while the rest are titanium. All the parts are stamped, but substantial and solid.

This is Seiko’s default diver’s extension clasp, with the same mechanism found on all models, from the entry-level to Grand Seiko, but executed with different degrees of finish. Being a mid-range watch, the SNR029 has a modestly-finished clasp that is not as refined as the equivalent on a Grand Seiko, but also not as basic as that on the base model diver.

Design-wise, the bracelet works well with the case. The bracelet links are simpler in style than those of most Prospex bracelets, which usually have polished borders on the middle link. The simplicity suits a dive watch, but the bracelet still has a bit of embellishment, a bevelled lower edge that neatly echoes the shape of the lugs.

Each link is secured by a friction-fit pin and tube, a tried and test method that is foolproof and secure, but it is not terribly user friend as the links are pretty fiddly to adjust.

That being said, every link is held by pin, which means there is no limit to the number of links that can be removed, which helps achieve a good fit. In contrast, most earlier generations of bracelets only featured a limited number of removable links, making it impossible to size just right for certain wrists.

Concluding thoughts

Modern day dive watches often get away from their original purpose by being over-designed or excessively elaborate. The SNR029 is very much fuss-free, with the high-precision Spring Drive movement being particularly well-suited to a “tool” watch.

While the watch is focused on what it’s supposed to be, it is also well made, with excellent fit and finish on the case and dial (and movement, even though that is hidden).

Key facts

Seiko Prospex LX Spring Drive Diver 300 m
Ref. SNR029 (SBDB027 in Japan)

Diameter: 44.8 mm
Height: 15.7 mm
Material: Titanium with hard coating
Water resistance: 300 m

Movement: 5R65
Features: Hours, minutes, seconds, date, and power reserve indicator
Winding: Automatic
Frequency: Spring Drive
Power reserve: 72 hours

Strap: Titanium bracelet

Availability: At Seiko boutiques and retailers
Price: US$6,000, or ¥630,000 (prices exclude taxes)

For more, visit Seikowatches.com.

Update March 25, 2020: Amended the text to reflect the fact that the ref. 6215-7000 may have been launched slightly earlier than 1968.

Back to top.

You may also enjoy these.

Audemars Piguet Introduces the [Re]master01 Chronograph

The Remaster01 looks back to the 1940s.

In 2015, an Audemars Piguet ref. 1533 sold for 305,000 Swiss francs, setting the record for a vintage AP chronograph at auction – which was then topped two years ago by another example of the same reference that sold for 384,500 Swiss francs.

An extra-large wristwatch with an unusual three-counter chronograph, instead of the two registers common at the time, the ref. 1533 was produced in the 1940s. Only nine were made, and three of the nine had two-tone, steel-and-gold cases, making them the rarest of variants. Unsurprisingly, both of the record-setting ref. 1533s were two-tone.

And now the two-tone ref. 1533 has now been “remastered” as the modern-sounding but appealingly vintage [Re]master01 Selfwinding Chronograph 40 mm, a limited edition of 500 watches to coincide with the new, spiral-shaped Audemars Piguet museum that’s scheduled to open around middle of the year.

Vintage details

Looking very much like the ref. 1533, the [Re]master01 recreates all of the key elements of the original.

Characterised by large, teardrop lugs, the case is steel with its bezel, crown, and pushers in 18k pink gold. It’s 40 mm to accommodate the large, automatic cal. 4409 inside, but because the original was already 36.5 mm – enormous in the 1940s – the increased diameter still maintains the retro style.

To match the gold accents, the dial has a gilt finish, which was unique amongst the vintage original – just one of the three two-tone ref. 1533s had a yellow gold-tone dial.

Because the cal. 4409 in the [Re]master01 has a different layout compared to the Valjoux 13VZAH in the original, the arrangement of the chronograph registers is different. But the crucial details of the originals have been retained, right down to the vintage logo that includes “Genève”, part of the company’s logo until its workshop in the city was closed in the 1970s.

Like the original, the hands are colour coded for function: gilt hands are for the time, while the blued steel hands are for the chronograph.

And more novel feature of the original has also been translated into the [Re]master01 – the 30-minute chronograph counter also includes a red “45”, representing the half-time mark for a football match. It was a feature requested by Jacques-Louis Audemars (1910-2003), the firm’s chairman until 1975 who was also a great fan of the game, resulting in most of the brand’s mid-20th century chronograph having a “45” on the minute register.

Flyback and in-house

The cal. 4409 inside is an in-house movement from the same family of chronograph calibres first found in last year’s Code 11.59 chronograph. Equipped with the usual column wheel and vertical clutch common in modern, high-end chronographs, it’s a large, 32 mm movement with a longish, 70-hour power reserve.

The cal. 4409 also has a flyback mechanism, meaning the chronograph can be instantaneously reset, and restarted with a single push of the reset button. And unlike the similar movement Code 11.59, this version of the movement has no date display (thankfully).

Though the movement is modern in style, the large, 22k pink gold rotor has been decorated with clous de Paris, or hobnail, guilloche executed the traditional way – engraved with a hand-operated rose engine.

Limited to 500 pieces, the [Re]master01 is priced at 49,500 Swiss francs, or about US$50,000, which makes it quite a bit more expensive than the Code 11.59 chronograph in pink gold, which costs about 20% less.

Key facts and price

Audemars Piguet [Re]master01 Selfwinding Chronograph 40 mm
Ref. 26595SR.OO.A032VE.01

Case diameter: 40 mm
Case height: 14.6 mm
Material: Steel and 18k pink gold
Water resistance: 20 m

Movement: Cal. 4409
Functions: Time, and flyback chronograph
Frequency: 28,800 beats per hour (4 Hz)
Winding: Automatic
Power reserve: 70 hours

Strap: Brown calfskin with pin buckle; additional brown alligator strap

Limited edition: 500 pieces
Availability: Only at Audemars Piguet boutiques from end-March 2020
Price: US$53,100; or 74,400 Singapore dollars

For more, visit Audemarspiguet.com.

Correction March 25, 2020: Both the cal. 4401 and 4409 in the Code 11.59 and [Re]master01 chronographs have a flyback mechanism, and not only the latter as stated in an earlier version of the article.

Back to top.

You may also enjoy these.

Welcome to the new Watches By SJX.

Subscribe to get the latest articles and reviews delivered to your inbox.