Hands On: Panerai Radiomir Bronzo PAM00760

Appealing, gently novel, but also expensive.

Launched quietly in May this year, the Radiomir Bronzo PAM00760 is the first substantially new Radiomir model in a long time. Besides being the first Radiomir with bronze case, the PAM 760 is also the first “Events Edition” – a limited-production model that will only be available during dinners hosted by Panerai chief executive Jean-Marc Pontroué.

Oversized and cleanly designed in the historical Panerai style, the Radiomir Bronzo is also the first step in the rejuvenation of the Radiomir line, which will see the addition of several new models in 2023. According to Mr Pontroué, the Radiomir will now be a range of watches that are largely historically inspired in terms of design. With that in mind, I would expect the “California” dial to return.

Available at dinner, and maybe lunches too

Initial thoughts

Big, thick, and looking very much like a Panerai on the wrist, the Radiomir Bronzo is appealing to anyone who likes the old-school Panerai look. While it does look like a typical Panerai, the Radiomir Bronzo manages to be fairly novel, at least as novel as a Panerai can be while still retaining its trademark design elements.

Besides being the first Radiomir in bronze – past models in the metal were all Submersibles – it also has a textured dial that’s fairly novel for the brand. But the textured finish is combined with traditional elements, a “sandwich” construction and blued hands. Overall it’s a good look, although I find the stitching on the strap excessive.

The textured dial in smoked green

While not a limited edition model, the Radiomir Bronzo is limited in terms of availability – it will only be available during dinner events hosted by Mr Pontroué. Consequently, its annual production should be in the low hundreds, making it a fairly uncommon watch, which does add to the appeal.

The PAM00760 is powered by the P.3000

I like the look, I like the feel, and I like the way it’s being sold since limits production numbers – even if the event-only availability is slightly pretentious.

However, I don’t like the price – retail is US$17,800 – which is just over double that of a comparable steel Radiomir. The price would have been more palatable if the watch had been executed with a more elaborate dial – for instance a precious metal dial plate – or a higher-end movement.

Rather than being priced according to its intrinsic features as well as the rest of the catalogue, the Radiomir Bronzo has been priced according to the high secondary market values of the brand’s other bronze watches. In one respect, however, the price is fair: the Radiomir Bronzo costs almost exactly the same as the Submersible Bronzo PAM00968, which is similarly too expensive for what it is.

Price aside, the Radiomir Bronzo is a compelling watch and certainly a good promising indicator of what’s to come for the Radiomir line.

The Submersible Bronzo PAM00968

Patina and wire

The case of the Radiomir Bronzo is made of the same bronze alloy Panerai uses for the Submersible Bronzo models. Primarily copper with a bit of tin, the alloy has a bright, coppery tone when new but quickly darkens as the patina develops, a result of surface oxidisation of bronze.

Typically the alloy develops a dull brown hue over time, though in extreme cases of oxidisation it can be covered in verdigris. A modest patina is appealing and adds to the dive-instrument aesthetic, but too much and it resembles something lost at sea that no one wants to find. (In contrast, the alternative bronze alloy used in watchmaking by brands like Tudor develops a brown-grey patina due to its high aluminium content).

Like Panerai’s other bronze watches, the case has a brushed finish that helps the process of oxidisation. The brushed finish also gives the watch a convincing maritime instrument aesthetics.

And it has a titanium case back naturally. A case back in steel or titanium is the norm for bronze watches simply because prolonged contact with bronze can cause an allergic reaction.

The brushed finish helps with the oxidisation process

The titanium back is screwed down

The “Pre-V” style buckle is bronze

The case is 47 mm in diameter, which is the largest Radiomir size and the one truest to the historical originals. While the 47 mm sounds large, it doesn’t wear as large due to the wire lugs that sit close to the case. The case is, however, very thick at about 16 mm high and looks the part.

The bulbous look is compounded by a domed crystal of PlexiGlas. Though the plastic crystal is not scratch resistant – and it creates a minor visual distortion of the edge of the dial – but PlexiGlas does have a slightly vintage flavour that goes well with the watch.

There’s nothing I would change about the case, except for the strap. The “box X” stitch on both sides of the strap is unsightly and also unnecessary since this type of stitch is usually meant for reinforcing two pieces of material. Fortunately, swapping straps on a Panerai practically synonymous with the brand.

A green sandwich

With the large Arabic numerals at the quarters, the dial is classic Panerai with both an engraved logo under 12 o’clock as well as a sandwich construction, both details inspired by the dials on vintage originals.

And the Super-Luminova is a familiar ecru, which suits the look perfectly. While such faux-vintage lume is overused today, Panerai was one of the first brands, maybe even the first, to do make liberal use of the substance, so it looks and feels correct here.

The novelty of the dial lies in the graduated colour and textured surface. At the centre it’s a dark green that quickly darkens towards the edges, enough that the edge of the dial is black. Notably, the dirty green harks back to the dial colour of the original pair of Bronzo watches, which were arguably the best looking of the Submersible series.

The smoked finish is combined with a granular, stamped texture that hasn’t been widely used by Panerai (yet). At a distance the grained surface gives the dial an aged appearance that pairs well with its general aesthetic.

All the elements of the dial work well together, well enough that I expect Panerai will iterate the same elements into new combinations for future models.

In fact, word has it that Panerai will unveil a pair of new Radiomir models with near-identical dials at the end of the year. The PAM01334 and PAM01335 will have dials in grey and blue respectively, along with a case in “aged” steel like the Radiomir PAM00992.

No-frills mechanics

The Radiomir Bronzo is powered by the same calibre found in most of Panerai’s hand-wind 47 mm models, the P.3000. It’s a simple workhorse conceived to replace the even simpler Unitas movement widely used in the earlier generation of Panerai watches.

The aesthetics of the movement are typical of Panerai – the bridges are large and linearly brushed, while the decoration is neatly done by machine

The engraved text on the bridges is filled with blue lacquer, a trademark feature of Panerai’s in-house movements

While the construction is straightforward and the finishing industrial, it does have two useful features, namely the free-sprung balance and twin mainsprings that provide a three-day power reserve.

The P.3000 is good enough for most of the watches it’s found in, but considering the price of the Radiomir Bronzo it could do with a fancier movement or even a P.3000 that’s been dressed up in some form.

The four-arm balance with adjustable regulating weights on its rim

Concluding thoughts

The Radiomir Bronzo is appealing on several levels. It has a largely traditional Panerai design while still being different in terms of materials and style. And the case material is one strongly associated with Panerai, more so than most other brands. The strap, however, doesn’t work but fortunately that’s an easy fix.

But the Radiomir Bronzo is pricey, though that hasn’t dampened demand as its 2022 production run is already sold out.


Key Facts and Prices

Panerai Radiomir Bronzo
Ref. PAM00760

Diameter: 47 mm
Height: Unavailable
Material: Bronze
Crystal: PlexiGlas
Water resistance: 100 m

Movement: P.3000
Functions: Hours and minutes
Winding: Hand wind
Frequency: 21,600 beats per hour (3 Hz)
Power reserve: 72 hours

Strap: Aged leather with pin buckle

Limited edition: No but limited availability
Availability: Only at Panerai dinner events hosted by Jean-Marc Pontroué
Price: US$17,800; or 24,500 Singapore dollars

For more information, visit Panerai.com.


 

Back to top.

You may also enjoy these.

G-Shock Introduces the Full-Metal “Octagonal Bezel” GM-B2100

A tongue-in-cheek take on the G-Shock?

One of G-Shock’s biggest hits in recent years, the octagonal 2100 series appears to be a new design (or one derived from a famous watch reated by Gerald Genta), but is in fact an adaptation of the first G-Shock from 1983, the DW-5000C. Both the 2100 and DW-5000C share an eight-sided bezel, but the bezel of the 1983 watch was an irregular octagon while the 2100 is a regular octagon.

Debuted in all-resin and followed by a version in a mix of metal and resin, the 2100 series was never available in metal from end to end until now. The Japanese watchmaker has just taken the covers off an all-steel iteration, the Full-Metal GM-B2100, available in black coating, rose gold plating, and steel.

Initial thoughts

The original 2100 in colorful resin is a appealing, affordable watch, explaining its popularity. Perhaps part of the appeal is its similarity to the Royal Oak, but there are other reasons that distinguish it from the countless G-Shocks variations, one being its compact dimensions and resulting comfort on the wrist. Now it gets even better with a metal bracelet.

Due to the aggressive fluting on the case sides along with the dimples on the bracelet links, the watch has an industrial or military feel, which is perfectly suited to the robust nature of a G-Shock.

Ironically, my favorite of the trio is the rose gold-plated version. Besides being an uncommon finish for watches in this price range, there’s a sense of humour in its passing resemblance to a rose gold Royal Oak.

The Full-Metal GM-B2100 starts at US$550, and costs another US$50 to in either black coating or rose gold plating. Even though that’s five times as much as the resin model, it is a much more striking design and is priced similarly to the all-metal G-Shock models.

Bona fide sporty

Like all other G-Shocks, the GM-B2100 is built to withstand shock thanks to the resin bumpers between the electronic module and case, which dampen impact and “disperse shock to the connective part of the band”. Along with a 200 m water resistance, it is one of the most durable sports watches with an integrated bracelet, albeit one that’s not mechanical.

The steps in producing the outer case in steel that starts with a stamped blank

Contrary to a typical G-Shock, the GM-B2100 sports an analog display, with chunky, three-dimensional hour markers and hands that add depth to the dial.

The movement within is pretty much full-spec G-Shock. It’s solar-powered and Bluetooth enabled for smartphone pairing, both of which were unavailable on the original GA-2100 of 2019. That said, the watch is still low tech in terms of nighttime legibility, it relies on a single LED bulb at five o’clock for backlight.


Key facts and price

G-Shock Full-Metal Octagonal Bezel
Ref. GM-B2100D-1A (steel)
Ref. GM-B2100BD-1A (steel with black coating)
Ref. GM-B2100GD-5A (steel with rose gold coating)

Diameter: 44.4 mm by 49.8 mm
Height: 12.8 mm
Material: Resin
Water resistance: 200 m

Functions: Analog, multifunction, Bluetooth connectivity
Winding: Solar-charging quartz
Battery life: 18 months with power saving function on

Strap: Steel bracelet

Limited edition: No
Availability:
 At G-Shock stores and retailers
Price:
Steel – US$550
Steel with ion plating – US$600


Back to top.

You may also enjoy these.

Welcome to the new Watches By SJX.

Subscribe to get the latest articles and reviews delivered to your inbox.

Exit mobile version