Book review: Kari Voutilainen Horlogerie d’Art, by Theodore Diehl (with exclusive previews)

Finnish independent watchmaker Kari Voutilainen is the subject of a newly published book. A wide ranging and beautifully illustrated tome, the book covers not just Voutilainen and his timepieces but the practice of watchmaking itself.

As one of the stars in the independent watchmaking firmament, it is only appropriate that Kari Voutilainen has a 272-page book dedicated to him and his brand of watchmaking. Written by Theodore Diehl, a watch lover who is also the spokesman at Richard Mille, Kari Voutilainen, Horlogerie d’Art is a patient and informative stroll through numerous watchmaking topics.

While beautifully illustrated, the book is not merely a pictorial exploration of the subjects. It covers Voutilainen himself, including a short account of his early years where he restored timepieces at Parmigiani before setting up on his own in 2002. This book also marks the tenth anniversary of the establishment of Voutilainen’s own workshop.

The book covers his workshop in Môtiers and its little known, but international team.

The book also provides brief introductions to several specifics of watchmaking relevant to Voutilainen, like the heat bluing of hands and the method for application of Geneva stripes.

Scattered throughout the book are quotes from Voutilainen, including this one on hands:

“Hands are really extremely complicated things; we often take them for granted. They are filled with very subtle changes of tapering, proportional balancing – and always have to be perfectly legible under all kinds of lighting conditions.”

And Voutilainen on guilloche dials:

“Take for instance a real guilloché machine for making dials. They have been out of production for years, and will never be made again. And you can’t make a really excellent guilloché dial without one.”

And of course the book also covers Voutilainen’s own timepieces, starting with his very earliest, including pocket watches, right up to the newest creations from his workshop.

Printed in a run of 1500 copies, with additional copies for Voutilainen clients, the book is available from Swiss horological book stockist Book Simonin come November for SFr255 (~US$282), excluding freight.

– SJX

Extracts from the book courtesy of Theodore Diehl.

Back to top.

You may also enjoy these.

Hands-on with the Vacheron Constantin Patrimony Contemporaine Ultra-Thin Calibre 1731 Minute Repeater (with live photos and price)

Vacheron Constantin took the covers off the Patrimony Contemporaine Ultra-Thin Calibre 1731 minute repeater at Watches&Wonders 2013, revealing for the first time the thinnest minute repeater on the market today.

Named for the birth year of its founder, the new Vacheron Constantin Calibre 1731 measures only 3.90 mm. And as a complete watch, the Patrimony Contemporaine Ultra-Thin Calibre 1731 is only 8.09 mm thick, making it the thinnest minute repeater.

Vacheron Constantin has a significant modern history with minute repeaters, thanks to the cal. 1755, unveiled in 1992. At 3.28 mm high, it was even thinner than the new cal. 1731. The cal. 1755 was one of the few in-house minute repeater movements offered by a major brand in the nineties, and well regarded by collectors. The last watches with the cal. 1755 came in 2010, a year after VC commenced development of the cal. 1731.

Final series of the Vacheron Constantin Cal. 1755 in the Malte Minute Repeater Perpetual Calendar Photo courtesy Alex Ghobti, The Hour Lounge

While its predecessor was classically styled, in fact it was based on a vintage VC repeater movement, the new cal. 1731 is a distinctively modern creature.

Much of the gear train is revealed, as is the spring which powers the minute repeater. Pulling the slide on the case winds up the spring, and releasing the slide causes the spring to unwind. The rate at which the spring unwinds is regulated by the silent governor, a gold-plated, cross-shaped device which sits to the left of the repeater hammers.

The spring which drives the repeater mechanism

As the spring unwinds, the governor begins to spin, causing its pair of wings to spread, thus acting as an air brake, and preventing the repeater spring from unwinding in an uncontrolled manner. And because the governor uses air as to slow its motion, it works silently, eliminating the buzz common in older repeater movements.

The governor at top left, with the hammer to its right

Regulator aside, this watch rates highly as a repeater. Its chimes (this watch is a prototype) are loudish, pleasant and clear. VC says the production pieces will sound even better. The minimalist bridges of the repeater also reveal much of the base plate, especially around the repeater hammers, giving the movement a widely spaced and airy feel. Combined with the free-sprung balance (hence the lack of a regulator index), the cal. 1731 has the characteristic appearance of a movement conceived recently.

VC has, however, gone the traditional route for the movement decoration, which is to say very, very good. All components are properly and attractively finished; the movement is Geneva Seal certified as well. Notable details include the tightly and evenly spaced perlage of different diameters on the base plate.

Another, more obvious, detail are the inward corners on the bridge edges which demonstrate beautifully executed anglage. That being said, not all the corners on all the bridges are finished in this manner. The rounded lines on certain bridges are less attractive, and more synonymous with modern milling and finishing.

That brings us to the obvious question: how does this compare to the competition in terms of finishing? Patek Philippe’s top-end repeaters like the ref. 5016 are better, slightly but evidently, with their lavish and almost luminous surface finishes.  From the front the contrast is stark, compared with the view of the movement. Styled like the rest of the Patrimony Contemporaine line, the dial is elegant but plain. The sole element on the dial which is unconventional is the seconds sub-dial, positioned at a quirky eight o’clock.

According to Vincent Kauffmann, the Design Director at VC, because of the movement layout, two options were available for the placement of the sub-dial, six and eight. The latter was chosen to give the design a unique twist, and to differentiate the repeater from the regular models.

Though it is simple, the watch is 41 mm in diameter. With its thin bezel and extreme slimness, it seems larger than it actually is, giving it good wrist presence. Available only in rose gold for now, the Patrimony Contemporaine Ultra-Thin Calibre 1731 costs €270,000 before taxes, or about US$365,000. – SJX

Back to top.

You may also enjoy these.

Welcome to the new Watches By SJX.

Subscribe to get the latest articles and reviews delivered to your inbox.

Exit mobile version